-
pH Sensor Module/pH meter kit
The pH Sensor Module (0–14 pH) with BNC Electrode Probe from Liqman Electronics is a high-precision pH measurement module for water quality monitoring, hydroponics, aquariums, laboratories and Arduino projects.
Key Features:
• Full 0–14 pH measurement range
• Glass pH electrode with BNC connector
• Analog voltage output
• 3.3V–5V DC operating voltage
• ±0.1 pH accuracy after calibration
• Fast response and stable measurements
• Replaceable pH electrode
• Compatible with Arduino, ESP32, Raspberry Pi and STM32
• Low power consumptionKSh 2,800.00pH Sensor Module/pH meter kit
KSh 2,800.00 -
Float Switch Liquid Level Sensor
The Float Switch Sensor from Liqman Electronics is a simple liquid level detection switch for water tanks, pumps, aquariums, irrigation systems and automation projects.
Key Features:
- Accurate liquid level detection
- Magnetic reed switch operation
- Simple ON/OFF output
- Normally Open / Normally Closed options
- Compact and lightweight design
- Easy installation and maintenance
- Low power operation
- Suitable for automatic pump control
- Compatible with PLCs, Arduino, ESP32 and relay modules
KSh 500.00Float Switch Liquid Level Sensor
KSh 500.00 -
XH-M452 Digital Temperature & Humidity Controller Module (12V 10A) with SHT20 Sensor
The XH-M452 Digital Temperature & Humidity Controller Module (12V 10A) with SHT20 Sensor from Liqman Electronics is an environmental control module designed for automatic temperature and humidity monitoring. It features an SHT20 digital sensor and dual relay outputs for independently controlling connected heating, cooling, humidifying and ventilation equipment.
Key Features:
- SHT20 temperature and humidity sensor
- 12V DC power supply
- Dual relay outputs
- Relay capacity up to 10A
- Temperature range: -20°C to 60°C
- Humidity range: 0–100% RH
- Control accuracy: 0.1°C / 0.1% RH
- Dual LED digital display
- Adjustable start and stop thresholds
- Compact 65 × 55 × 28 mm design
- Suitable for incubators, greenhouses, farming and automation
KSh 1,800.00 -
McNamum Wheel Aluminum Car Chassis 4WD
The McNamum Wheel Aluminum Car Chassis 4WD from Liqman Electronics is a durable 4WD robotic platform designed for robotics, automation, STEM and DIY projects. Its aluminum alloy frame and four Mecanum wheels provide omnidirectional movement, allowing forward, backward, sideways, diagonal and rotational motion.
Key Features:
- Durable aluminum alloy chassis
- Four-wheel drive (4WD) configuration
- Four Mecanum wheels
- Omnidirectional movement
- Supports lateral, diagonal and rotational motion
- Lightweight and robust design
- Multiple mounting points for components
- Compatible with Arduino, ESP32 and Raspberry Pi
- Easy to assemble and customize
- Suitable for robotics competitions and research
KSh 2,500.00McNamum Wheel Aluminum Car Chassis 4WD
KSh 2,500.00 -
Current Sensor Module 5A – ZMCT103C
The Current Sensor Module – ZMCT103C from Liqman Electronics is a compact AC current measurement module based on a precision current transformer. It provides electrical isolation while measuring AC current, making it suitable for energy monitoring, automation, Arduino, ESP32 and other electronics projects.
Key Features:
- ZMCT103C current transformer
- Rated input current: 5A AC
- Linear measurement range: 0–10A AC
- Rated output: 5mA at 5A input
- 1000:1 turns ratio
- Accuracy class 0.2
- Up to 4500V isolation voltage
- 50Hz / 60Hz operating frequency
- Analog signal output
- PCB-mount design
- Epoxy resin encapsulation
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
KSh 500.00Current Sensor Module 5A – ZMCT103C
KSh 500.00 -
ZMPT101B Single-Phase AC Voltage Sensor Module
The ZMPT101B Single-Phase AC Voltage Sensor Module from Liqman Electronics is a precision AC voltage measurement module with transformer isolation for safer voltage monitoring. It provides an adjustable analog output for Arduino, ESP32, ESP8266, STM32, Raspberry Pi Pico and other microcontroller projects.
Key Features:
- ZMPT101B precision voltage transformer
- Single-phase AC voltage sensing
- Transformer-based electrical isolation
- 5V DC operating voltage
- Adjustable sensitivity using multi-turn potentiometer
- Analog output for microcontroller ADC inputs
- Onboard operational amplifier signal conditioning
- 50Hz–60Hz frequency range
- Compact 49mm × 20mm design
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
- Suitable for energy monitoring, smart metering and automation
KSh 500.00 -
DC Voltage Sensor Detection Module
The DC Voltage Sensor Detection Module from Liqman Electronics is a compact voltage monitoring module for measuring DC voltage and providing a proportional analog signal to microcontrollers. It is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi Pico, battery monitoring, solar systems and robotics.
Key Features:
- DC voltage measurement up to 25V
- 5:1 voltage divider ratio
- Analog output proportional to input voltage
- 3.3V–5V compatible
- Simple AO, VCC and GND interface
- Compact 25 × 13mm design
- FR-4 fiberglass PCB
- Through-hole connection
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
- Suitable for battery, solar and power supply monitoring
KSh 200.00DC Voltage Sensor Detection Module
KSh 200.00 -
LCD1602 Shell Case Holder
The LCD1602 Shell Case Holder from Liqman Electronics is a protective enclosure for standard 16×2 LCD display modules.
Key Features:
- Designed for LCD1602 16×2 displays
- Protective plastic enclosure
- Lightweight and durable
- Clear display viewing area
- Easy mounting and installation
- Supports parallel and I2C LCD configurations
- Neat and professional appearance
- Suitable for Arduino, ESP32, robotics and DIY projects
KSh 150.00LCD1602 Shell Case Holder
KSh 150.00 -
3S 40A 18650 BMS with Cell Balancing
The 3S 40A 18650 BMS with Cell Balancing from Liqman Electronics is a protection board for 3-series lithium-ion and Li-Po battery packs.
Key Features:
- 3S configuration for 11.1V nominal battery packs
- 40A continuous current rating
- Cell balancing for three battery cells
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Temperature monitoring
- Compatible with 18650 lithium-ion and Li-Po cells
- Suitable for robotics, power tools and DIY battery packs
KSh 500.003S 40A 18650 BMS with Cell Balancing
KSh 500.00 -
TCS3200 / TCS230 Color Recognition Sensor
The TCS3200 / TCS230 Color Recognition Sensor from Liqman Electronics is a versatile color detection module that measures red, green, blue, and clear light intensity through frequency output for use with Arduino, ESP32, Raspberry Pi, and other embedded systems.
Key Features
- RGB color recognition using filtered photodiode arrays
- Frequency output proportional to light intensity
- Selectable output frequency scaling
- Integrated white LEDs for consistent target illumination
- Fast response for real-time color detection
- Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers
- Suitable for color sorting, robotics, automation, and educational projects
KSh 1,100.00TCS3200 / TCS230 Color Recognition Sensor
KSh 1,100.00 -
MAX30102 Heart Rate and Pulse Oximeter Sensor Module
MAX30102 Heart Rate & Pulse Oximeter Sensor measures BPM & SpO₂ via I2C. Perfect for Arduino, ESP32, Raspberry Pi, and wearable health monitoring projects.
KSh 550.00 -
Pulse Sensor
Pulse Sensor module for Arduino & wearables. Measures heartbeat in real time with easy analog output. Perfect for health, fitness, and biomedical projects.
KSh 650.00Pulse Sensor
KSh 650.00











