- “24GHz Radar Human Motion Sensor – HLK-LD1020” already exists in your wishlist
-
Microphone Sound Sensor Module KY-038
Microphone Sound Sensor Module KY-038 from Liqman Electronics is an Arduino-compatible sound detection module with analog and digital outputs, ideal for sound-activated, voice, and noise-monitoring projects
KSh 200.00Microphone Sound Sensor Module KY-038
KSh 200.00 -
Breadboard 830 points
830-Point Solderless Breadboard. This is a premium solderless breadboard with 830 tie points, perfect for prototyping and testing electronic circuits without soldering. It’s widely used in educational kits, DIY electronics, and professional development environments.
KSh 200.00Breadboard 830 points
KSh 200.00 -
LCD module 1602 i2c
LCD Module 1602 I2C is a 16×2 character LCD display with blue/green backlight and an I2C interface, ideal for Arduino, ESP32, Raspberry Pi, and other electronics projects
KSh 450.00LCD module 1602 i2c
KSh 450.00 -
ZK-AS21 2.1 Bluetooth Amplifier Board
The ZK-AS21 2.1 Bluetooth Amplifier Board from Liqman Electronics is a powerful Class-D audio amplifier for DIY speaker systems, home audio, multimedia and custom sound projects. It supports 2.1-channel output with Bluetooth 5.1, AUX, USB and USB sound card connectivity.
Key Features:
• Dual TPA3255 Class-D amplifier chips
• 2.1-channel stereo and subwoofer output
• Bluetooth 5.1 wireless audio
• AUX, USB Flash Drive and USB Sound Card support
• Independent volume, bass, treble and subwoofer controls
• Adjustable subwoofer crossover frequency
• DC 18–36 V operating voltage
• Supports 3–8 Ω stereo speakers and 2–8 Ω subwoofers
• Built-in protection against overheating, overcurrent and short circuits
• Suitable for DIY speakers, soundbars, home audio and subwoofer projectsKSh 6,000.00ZK-AS21 2.1 Bluetooth Amplifier Board
KSh 6,000.00 -
Active Buzzer Module
Key Features
- Operating Voltage: 3.3V–5V DC
- Built-in oscillator
- No PWM required for continuous tone generation
- Current Consumption: <30mA
- Easy interface with digital pins
- Compact PCB design with connection pins
- Loud and clear tone
- Suitable for microcontroller projects
KSh 20.00Active Buzzer Module
KSh 20.00 -
MALE TO MALE jumper wires 40pcs
MALE TO MALE jumper wires 40pcs. Perfect for prototyping and DIY electronics, this set of 40 male-to-male jumper wires is a staple for any maker’s toolkit. Designed for seamless breadboard and microcontroller connections, these wires offer flexibility, durability, and ease of use.
KSh 150.00MALE TO MALE jumper wires 40pcs
KSh 150.00 -
Relay module 5V 1 Channel
Relay Module 5V 1 Channel is an Arduino-friendly digital switching module designed to control high-voltage and high-current devices safely. Available from Liqman Electronics, this 5V relay module supports loads up to 10A at 250VAC or 30VDC, making it suitable for electronics projects, automation, lighting control, and other applications requiring reliable switching
KSh 150.00Relay module 5V 1 Channel
KSh 150.00 -
Raspberry PI Mini ProMicro RP2040
The Raspberry PI Mini ProMicro RP2040 from Liqman Electronics is a compact development board based on the RP2040 dual-core microcontroller. With a ProMicro form factor, USB connectivity, GPIO, ADC, PWM, UART, I2C and SPI support, it is suitable for embedded systems, robotics, IoT, automation and USB projects.
Key Features:
- RP2040 dual-core ARM Cortex-M0+ processor
- Clock speed up to 133 MHz
- 264 KB SRAM
- Typically 2 MB flash memory
- Compact ProMicro form factor
- Up to 18 multifunction GPIO pins
- Up to 4 ADC channels
- PWM support
- UART, I2C, SPI and USB interfaces
- Compatible with Arduino IDE, MicroPython, CircuitPython and PlatformIO
- Supports C/C++ programming
- Suitable for robotics, IoT, USB and embedded projects
KSh 1,200.00Raspberry PI Mini ProMicro RP2040
KSh 1,200.00 -
Single-Sided Copper Clad PCB Board (10 x 15 cm, 1.5mm FR4 Glass Fiber)
Single-Sided Copper Clad PCB Board 10 x 15 cm from Liqman Electronics for prototyping, circuit etching, and DIY electronics projects.
Key Features
- Board size: 10 x 15 cm
- Thickness: 1.5 mm
- FR4 glass fiber construction
- Single-sided copper clad layer
- Durable and stable base material
- Good electrical insulation
- Suitable for custom circuit designs
- Easy to use for PCB etching and prototyping
- Suitable for educational and DIY electronics projects
KSh 120.00 -
Arduino Uno
Shop Arduino Uno R3 ATmega328P Board from Liqman Electronics for robotics, IoT, automation, prototyping, and DIY electronics projects.
Key Features
- ATmega328P microcontroller
- 5V operating voltage
- Recommended input voltage: 7–12V
- Input voltage limits: 6–20V
- 14 digital I/O pins
- 6 PWM-capable digital pins
- 6 analog input pins
- 20mA DC current per I/O pin
- 32KB Flash memory
- 2KB SRAM
- 1KB EEPROM
- 16MHz clock speed
- USB Type-B interface for programming and power
- Onboard power jack for external supply
- ICSP header
- Reset button
- Compatible with Arduino IDE on Windows, macOS, and Linux
KSh 1,200.00Arduino Uno
KSh 1,200.00 -
9V Battery Connector
Shop 9V Battery Connector Snap-On Clip with Wires from Liqman Electronics for Arduino, breadboards, PCBs, robotics, and DIY electronics projects.
Key Features
- Type: Snap-on 9V battery connector
- Wires: Red (+) and black (–)
- Wire Length: Approximately 10–15cm
- Strong, durable plastic cap
- Secure battery connection
- Easy to use with breadboards and PCBs
- Compatible with standard 9V batteries
- Suitable for small electronic circuits
KSh 30.009V Battery Connector
KSh 30.00 -
Raindrop Detection Sensor Module
Raindrop Sensor is a tool used for sensing rain. It consists of two modules, a rain board that detects the rain and a control module, which compares the analog value, and converts it to a digital value
KSh 200.00Raindrop Detection Sensor Module
KSh 200.00











