• 12V DC 1/2″ Solenoid Valve – Normally Closed (NC)

    Key Features:

    • 12V DC operating voltage
    • Normally Closed (NC) design
    • 1/2-inch threaded inlet and outlet
    • Automatic ON/OFF fluid control
    • Suitable for water and compatible low-viscosity fluids
    • Compact inline design
    • Relay and MOSFET control compatible
    • Compatible with Arduino and ESP32 projects
    • Suitable for PLC automation systems
  • Turbidity Sensor Module

    Key Features:

    • Designed for water turbidity and clarity detection
    • Analog sensor output
    • Suitable for Arduino, ESP32 and ESP8266 projects
    • Detects changes caused by suspended particles
    • Suitable for water filtration and monitoring systems
    • Compact and easy to integrate
    • Useful for IoT and DIY electronics projects
    • Suitable for aquarium and environmental monitoring
    • Supports threshold-based monitoring on compatible versions
  • 1.3″ 240×240 RGB TFT IPS LCD Display Module – 7-Pin

    The 1.3″ 240×240 RGB TFT IPS LCD Display Module is a compact colour display ideal for graphical interfaces, sensor readings, menus, icons, and embedded projects.

    Key Features:
    • 1.3-inch RGB TFT IPS display
    • 240×240 pixel resolution
    • Full-colour display
    • Wide IPS viewing angles
    • Compact square design
    • 7-pin interface
    • Suitable for SPI-based applications depending on version
    • Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi
    • Ideal for graphics, text, icons and images
    • Suitable for IoT, robotics and DIY electronics

  • 0.96″ I2C Blue OLED Display Module – 128×64

    A compact 0.96-inch blue OLED display with 128×64 resolution and a simple I2C interface, suitable for displaying text, sensor readings, icons, and graphics in electronics projects.

    • 128×64 pixel resolution
    • Blue monochrome OLED display
    • 4-pin I2C/IIC interface
    • High-contrast display with no backlight required
    • Supports text, numbers, icons, and simple graphics
    • Compatible with Arduino, ESP32, ESP8266, STM32, and Raspberry Pi
    • Suitable for IoT, robotics, monitoring, and embedded projects

  • FUS1881 Hall Effect Sensor

    The FUS1881 Hall Effect Sensor is a high-sensitivity magnetic sensor with latching operation and an open-drain digital output. It is suitable for detecting magnetic position, rotation, proximity, and speed in electronic and automation projects.

    Key Features:
    • FUS1881 / US1881 Hall effect sensor
    • Latching magnetic operation
    • 3.5V–24V DC operating voltage
    • Open-drain digital output
    • High magnetic sensitivity
    • Compact 3-pin TO-92 package
    • Suitable for RPM and speed measurement
    • Ideal for Arduino, ESP32 and STM32 projects
    • Suitable for motor and robotics applications
    • Useful for magnetic position and proximity detection

  • LM35DZ Temperature Sensor

    The LM35DZ Temperature Sensor is a precision analog temperature sensor with a linear voltage output proportional to temperature. It is ideal for temperature monitoring, automation, Arduino projects, robotics, and DIY electronics.

    Key Features:
    • Analog temperature output
    • 10 mV/°C output scale
    • Celsius-based measurement
    • Compact 3-pin TO-92 package
    • 4V–30V supply voltage
    • Low power consumption
    • Factory calibrated
    • Easy microcontroller interface
    • Suitable for Arduino, ESP32 and STM32
    • Ideal for temperature monitoring and control

  • 24GHz Radar Human Motion Sensor – HLK-LD1020

    The HLK-LD1020 is a compact microwave radar sensor for detecting human movement and micro-motion. With a 10.525GHz operating frequency, adjustable detection range, and simple output interface, it is ideal for automation and embedded electronics applications.

    Key Features:
    • HLK-LD1020 radar motion sensor
    • 10.525GHz X-band operating frequency
    • Human motion and micro-motion detection
    • Approximately 2–8m detection range
    • Adjustable sensitivity and delay
    • 3.3V–12V operating voltage
    • Low current consumption
    • Compact 15 × 15 × 2.4mm design
    • Approximately 110° detection beamwidth
    • Suitable for Arduino, ESP32 and IoT projects
    • Ideal for smart lighting, security and automation

  • DFPlayer Mini MP3 Module

    The DFPlayer Mini MP3 Module – Liqman Electronics is a compact audio playback module for adding music, voice prompts, alarms, and sound effects to Arduino, ESP32, robotics, automation, and DIY electronics projects.

    Key Features:
    • TF/microSD card audio playback
    • Supports MP3, WAV and WMA on compatible versions
    • UART serial control
    • Built-in speaker amplifier
    • Up to approximately 3W output on supported versions
    • IO trigger and ADKEY control
    • 3.2V–5V operating voltage
    • Compact 21 × 21mm design
    • Ideal for Arduino, ESP32 and ESP8266 projects

  • Helping Hands Magnifier Glass Stand

    The Helping Hands Magnifier Glass Stand from Liqman Electronics is a practical hands-free tool for soldering, electronics repair, PCB assembly, crafting, and other precision work. It features adjustable alligator clips and an integrated magnifying glass for securely holding and viewing small components.

    Key Features:

    • Hands-free design for precision work
    • Integrated magnifying glass
    • Adjustable alligator clips
    • Flexible positioning
    • Stable workbench base
    • Ideal for soldering and PCB assembly
    • Suitable for Arduino, ESP32, robotics, and DIY projects
    • Useful for crafts, model making, and miniature work
    • Compact and convenient for workshops

  • ZK-AS21 2.1 Bluetooth Amplifier Board

    The ZK-AS21 2.1 Bluetooth Amplifier Board from Liqman Electronics is a powerful Class-D audio amplifier for DIY speaker systems, home audio, multimedia and custom sound projects. It supports 2.1-channel output with Bluetooth 5.1, AUX, USB and USB sound card connectivity.

    Key Features:

    • Dual TPA3255 Class-D amplifier chips
    • 2.1-channel stereo and subwoofer output
    • Bluetooth 5.1 wireless audio
    • AUX, USB Flash Drive and USB Sound Card support
    • Independent volume, bass, treble and subwoofer controls
    • Adjustable subwoofer crossover frequency
    • DC 18–36 V operating voltage
    • Supports 3–8 Ω stereo speakers and 2–8 Ω subwoofers
    • Built-in protection against overheating, overcurrent and short circuits
    • Suitable for DIY speakers, soundbars, home audio and subwoofer projects

  • PH Non-Rechargeable Electrode Probe

    The pH Non-Rechargeable Electrode Probe from Liqman Electronics is a sealed gel BNC probe for pH measurement in water, hydroponics, aquariums and DIY monitoring projects.

    Key Features:

    • pH range: 0–14
    • Sealed gel design
    • Standard BNC connector
    • Glass electrode
    • Low maintenance
    • Suitable for pH meters and sensor modules
    • Compatible with Arduino and ESP32

Main Menu