- “Resistors – 220Ω, 330Ω, 1KΩ, 4.7KΩ (1/4 Watt)” already exists in your wishlist
-
12V DC 1/2″ Solenoid Valve – Normally Closed (NC)
Key Features:
- 12V DC operating voltage
- Normally Closed (NC) design
- 1/2-inch threaded inlet and outlet
- Automatic ON/OFF fluid control
- Suitable for water and compatible low-viscosity fluids
- Compact inline design
- Relay and MOSFET control compatible
- Compatible with Arduino and ESP32 projects
- Suitable for PLC automation systems
KSh 900.00 -
Turbidity Sensor Module
Key Features:
- Designed for water turbidity and clarity detection
- Analog sensor output
- Suitable for Arduino, ESP32 and ESP8266 projects
- Detects changes caused by suspended particles
- Suitable for water filtration and monitoring systems
- Compact and easy to integrate
- Useful for IoT and DIY electronics projects
- Suitable for aquarium and environmental monitoring
- Supports threshold-based monitoring on compatible versions
KSh 1,700.00Turbidity Sensor Module
KSh 1,700.00 -
Mobile Phone Vibration Motor
The Mobile Phone Vibration Motor is a compact flat DC motor designed to provide vibration and haptic feedback in mobile phones, wearable devices, portable electronics, toys, and DIY projects. Its small, low-profile design makes it ideal for space-constrained applications. It can also be controlled using Arduino, ESP32, and other microcontrollers through a suitable transistor or MOSFET driver.
KSh 100.00Mobile Phone Vibration Motor
KSh 100.00 -
1.3″ 240×240 RGB TFT IPS LCD Display Module – 7-Pin
The 1.3″ 240×240 RGB TFT IPS LCD Display Module is a compact colour display ideal for graphical interfaces, sensor readings, menus, icons, and embedded projects.
Key Features:
• 1.3-inch RGB TFT IPS display
• 240×240 pixel resolution
• Full-colour display
• Wide IPS viewing angles
• Compact square design
• 7-pin interface
• Suitable for SPI-based applications depending on version
• Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi
• Ideal for graphics, text, icons and images
• Suitable for IoT, robotics and DIY electronicsKSh 800.00 -
FUS1881 Hall Effect Sensor
The FUS1881 Hall Effect Sensor is a high-sensitivity magnetic sensor with latching operation and an open-drain digital output. It is suitable for detecting magnetic position, rotation, proximity, and speed in electronic and automation projects.
Key Features:
• FUS1881 / US1881 Hall effect sensor
• Latching magnetic operation
• 3.5V–24V DC operating voltage
• Open-drain digital output
• High magnetic sensitivity
• Compact 3-pin TO-92 package
• Suitable for RPM and speed measurement
• Ideal for Arduino, ESP32 and STM32 projects
• Suitable for motor and robotics applications
• Useful for magnetic position and proximity detectionKSh 100.00FUS1881 Hall Effect Sensor
KSh 100.00 -
LM35DZ Temperature Sensor
The LM35DZ Temperature Sensor is a precision analog temperature sensor with a linear voltage output proportional to temperature. It is ideal for temperature monitoring, automation, Arduino projects, robotics, and DIY electronics.
Key Features:
• Analog temperature output
• 10 mV/°C output scale
• Celsius-based measurement
• Compact 3-pin TO-92 package
• 4V–30V supply voltage
• Low power consumption
• Factory calibrated
• Easy microcontroller interface
• Suitable for Arduino, ESP32 and STM32
• Ideal for temperature monitoring and controlKSh 200.00LM35DZ Temperature Sensor
KSh 200.00 -
DFPlayer Mini MP3 Module
The DFPlayer Mini MP3 Module – Liqman Electronics is a compact audio playback module for adding music, voice prompts, alarms, and sound effects to Arduino, ESP32, robotics, automation, and DIY electronics projects.
Key Features:
• TF/microSD card audio playback
• Supports MP3, WAV and WMA on compatible versions
• UART serial control
• Built-in speaker amplifier
• Up to approximately 3W output on supported versions
• IO trigger and ADKEY control
• 3.2V–5V operating voltage
• Compact 21 × 21mm design
• Ideal for Arduino, ESP32 and ESP8266 projectsKSh 300.00DFPlayer Mini MP3 Module
KSh 300.00 -
ZK-AS21 2.1 Bluetooth Amplifier Board
The ZK-AS21 2.1 Bluetooth Amplifier Board from Liqman Electronics is a powerful Class-D audio amplifier for DIY speaker systems, home audio, multimedia and custom sound projects. It supports 2.1-channel output with Bluetooth 5.1, AUX, USB and USB sound card connectivity.
Key Features:
• Dual TPA3255 Class-D amplifier chips
• 2.1-channel stereo and subwoofer output
• Bluetooth 5.1 wireless audio
• AUX, USB Flash Drive and USB Sound Card support
• Independent volume, bass, treble and subwoofer controls
• Adjustable subwoofer crossover frequency
• DC 18–36 V operating voltage
• Supports 3–8 Ω stereo speakers and 2–8 Ω subwoofers
• Built-in protection against overheating, overcurrent and short circuits
• Suitable for DIY speakers, soundbars, home audio and subwoofer projectsKSh 6,000.00ZK-AS21 2.1 Bluetooth Amplifier Board
KSh 6,000.00 -
PH Non-Rechargeable Electrode Probe
The pH Non-Rechargeable Electrode Probe from Liqman Electronics is a sealed gel BNC probe for pH measurement in water, hydroponics, aquariums and DIY monitoring projects.
Key Features:
• pH range: 0–14
• Sealed gel design
• Standard BNC connector
• Glass electrode
• Low maintenance
• Suitable for pH meters and sensor modules
• Compatible with Arduino and ESP32KSh 1,600.00PH Non-Rechargeable Electrode Probe
KSh 1,600.00











