-
ESP32-DEVKITC
This is ESP WROOM 32/ ESP32 Wi-Fi-BT-BLE MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.
KSh 1,400.00ESP32-DEVKITC
KSh 1,400.00 -
ESP32 Devkit Type C
A compact and versatile development board powered by the ESP 32 Devkit module, offering dual-core performance, built-in WiFi and Bluetooth, and 38 GPIO pins for advanced I/O capabilities—perfect for smart devices, automation projects, and rapid IoT prototyping.
KSh 1,400.00ESP32 Devkit Type C
KSh 1,400.00 -
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit Arduino Based use to measure the electrical activity of the heart.
KSh 1,500.00 -
Analog TDS Sensor Meter
This analog TDS (Total Dissolved Solids) sensor module is designed to measure the concentration of dissolved solids in water, offering a reliable indicator of water cleanliness. Ideal for DIY water monitoring systems, hydroponics, and environmental projects, it’s fully compatible with microcontrollers like Arduino and ESP32.
KSh 1,500.00Analog TDS Sensor Meter
KSh 1,500.00 -
7S 24V 25A Smart BMS (Balanced, Temp-Controlled)
The 7S 24V 25A Smart BMS (Balanced, Temp-Controlled) is a battery management system from Liqman Electronics designed to protect and balance 7-series lithium battery packs.
Key Features:
- 7S battery configuration
- 25A continuous current rating
- Cell voltage balancing
- Temperature monitoring and protection
- Overcharge and over-discharge protection
- Overcurrent and short-circuit protection
- 10-MOSFET design
- Pre-wired balance and power cables
- Suitable for compatible Li-ion and LiFePO₄ battery packs
KSh 1,500.007S 24V 25A Smart BMS (Balanced, Temp-Controlled)
KSh 1,500.00 -
PH Non-Rechargeable Electrode Probe
The pH Non-Rechargeable Electrode Probe from Liqman Electronics is a sealed gel BNC probe for pH measurement in water, hydroponics, aquariums and DIY monitoring projects.
Key Features:
• pH range: 0–14
• Sealed gel design
• Standard BNC connector
• Glass electrode
• Low maintenance
• Suitable for pH meters and sensor modules
• Compatible with Arduino and ESP32KSh 1,600.00PH Non-Rechargeable Electrode Probe
KSh 1,600.00 -
Turbidity Sensor Module
Key Features:
- Designed for water turbidity and clarity detection
- Analog sensor output
- Suitable for Arduino, ESP32 and ESP8266 projects
- Detects changes caused by suspended particles
- Suitable for water filtration and monitoring systems
- Compact and easy to integrate
- Useful for IoT and DIY electronics projects
- Suitable for aquarium and environmental monitoring
- Supports threshold-based monitoring on compatible versions
KSh 1,700.00Turbidity Sensor Module
KSh 1,700.00 -
ESP32-S3 N16R8 Development Board
ESP32-S3 N16R8 Development Board from Liqman Electronics for advanced IoT, wireless, AIoT, and embedded systems projects.
Key Features
- ESP32-S3 dual-core microcontroller
- Processing speeds up to 240MHz
- 16MB onboard Flash
- 8MB PSRAM
- 2.4GHz Wi-Fi IEEE 802.11 b/g/n
- Bluetooth Low Energy 5.0 with Mesh support
- Native USB-OTG support
- Multiple GPIO pins
- SPI, I2C, UART, I2S, PWM, ADC, and touch sensing
- Supports Arduino IDE, ESP-IDF, MicroPython, and CircuitPython
- Secure boot and flash encryption
- Hardware-accelerated AES, RSA, SHA, and ECC cryptography
- True random number generation
- Suitable for IoT, AIoT, automation, and edge computing applications
KSh 1,800.00ESP32-S3 N16R8 Development Board
KSh 1,800.00 -
XH-M452 Digital Temperature & Humidity Controller Module (12V 10A) with SHT20 Sensor
The XH-M452 Digital Temperature & Humidity Controller Module (12V 10A) with SHT20 Sensor from Liqman Electronics is an environmental control module designed for automatic temperature and humidity monitoring. It features an SHT20 digital sensor and dual relay outputs for independently controlling connected heating, cooling, humidifying and ventilation equipment.
Key Features:
- SHT20 temperature and humidity sensor
- 12V DC power supply
- Dual relay outputs
- Relay capacity up to 10A
- Temperature range: -20°C to 60°C
- Humidity range: 0–100% RH
- Control accuracy: 0.1°C / 0.1% RH
- Dual LED digital display
- Adjustable start and stop thresholds
- Compact 65 × 55 × 28 mm design
- Suitable for incubators, greenhouses, farming and automation
KSh 1,800.00 -
Digital PH meter pen.
This compact and portable digital pH meter pen is designed for fast and accurate pH measurements across a wide range of applications. With a clear LCD display and built-in calibration features, it’s ideal for testing water quality in aquariums, hydroponics, swimming pools, and laboratories.
KSh 2,000.00Digital PH meter pen.
KSh 2,000.00 -
ESP32-CAM OV3660 Camera
ESP32-CAM OV3660 Camera Module from Liqman Electronics for wireless imaging, IoT, surveillance, and embedded vision projects.
Key Features
- ESP32 dual-core microcontroller
- OV3660 3MP camera sensor
- Image resolution up to 2048 × 1536
- Built-in Wi-Fi and Bluetooth
- 4MB Flash memory
- Built-in microSD card slot
- Multiple GPIO pins for external components
- Supports JPEG image compression
- Adjustable image settings including brightness, contrast, and exposure
- Compatible with Arduino IDE, ESP-IDF, and MicroPython
- Suitable for battery-powered and remote applications
KSh 2,200.00ESP32-CAM OV3660 Camera
KSh 2,200.00 -
McNamum Wheel Aluminum Car Chassis 4WD
The McNamum Wheel Aluminum Car Chassis 4WD from Liqman Electronics is a durable 4WD robotic platform designed for robotics, automation, STEM and DIY projects. Its aluminum alloy frame and four Mecanum wheels provide omnidirectional movement, allowing forward, backward, sideways, diagonal and rotational motion.
Key Features:
- Durable aluminum alloy chassis
- Four-wheel drive (4WD) configuration
- Four Mecanum wheels
- Omnidirectional movement
- Supports lateral, diagonal and rotational motion
- Lightweight and robust design
- Multiple mounting points for components
- Compatible with Arduino, ESP32 and Raspberry Pi
- Easy to assemble and customize
- Suitable for robotics competitions and research
KSh 2,500.00McNamum Wheel Aluminum Car Chassis 4WD
KSh 2,500.00











