- “ESP32 CAM 4WD Smart Robot Car Kit with WiFi APP Control” already exists in your wishlist
-
45 Kinds of Sensor Module Kit
The 45 Kinds of Sensor Module Kit from Liqman Electronics is a versatile collection of 45 sensor and electronic modules for Arduino, ESP32, Raspberry Pi, STM32 and other development platforms. It is suitable for learning, prototyping, robotics, IoT, automation and electronics projects.
Key Features:
- Includes 45 different sensor and module types
- Compatible with Arduino, ESP32, Raspberry Pi and STM32
- Supports digital and analog sensing applications
- Easy-to-connect modules with standard pin headers
- Ideal for STEM education and electronics training
- Suitable for robotics, IoT and automation projects
- Useful for prototyping and experimentation
- Suitable for beginners, students and experienced developers
KSh 3,500.0045 Kinds of Sensor Module Kit
KSh 3,500.00 -
4S 40A 18650 BMS with Cell Balancing
The 4S 40A 18650 BMS with Cell Balancing from Liqman Electronics is a protection board for 4-series lithium-ion and Li-Po battery packs.
Key Features:
- 4S configuration for 14.8V nominal battery packs
- 40A continuous current rating
- Cell balancing for four battery cells
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Temperature monitoring
- Compatible with 18650 lithium-ion and Li-Po cells
- Suitable for power tools, robotics, e-bikes and DIY battery packs
KSh 500.004S 40A 18650 BMS with Cell Balancing
KSh 500.00 -
5kg Load Cell Weight Sensor
5Kg load cell weight sensor for Arduino, scales, and automation. Accurate, durable, and HX711 compatible—ideal for weight measurement in DIY projects.
KSh 400.005kg Load Cell Weight Sensor
KSh 400.00 -
7S 24V 25A Smart BMS (Balanced, Temp-Controlled)
The 7S 24V 25A Smart BMS (Balanced, Temp-Controlled) is a battery management system from Liqman Electronics designed to protect and balance 7-series lithium battery packs.
Key Features:
- 7S battery configuration
- 25A continuous current rating
- Cell voltage balancing
- Temperature monitoring and protection
- Overcharge and over-discharge protection
- Overcurrent and short-circuit protection
- 10-MOSFET design
- Pre-wired balance and power cables
- Suitable for compatible Li-ion and LiFePO₄ battery packs
KSh 1,500.007S 24V 25A Smart BMS (Balanced, Temp-Controlled)
KSh 1,500.00 -
9V Battery Connector
Shop 9V Battery Connector Snap-On Clip with Wires from Liqman Electronics for Arduino, breadboards, PCBs, robotics, and DIY electronics projects.
Key Features
- Type: Snap-on 9V battery connector
- Wires: Red (+) and black (–)
- Wire Length: Approximately 10–15cm
- Strong, durable plastic cap
- Secure battery connection
- Easy to use with breadboards and PCBs
- Compatible with standard 9V batteries
- Suitable for small electronic circuits
KSh 30.009V Battery Connector
KSh 30.00 -
9V Battery Connector with DC Plug
Key Features
- Connector Type: 9V snap-on battery clip to DC barrel jack
- DC Plug Size: 5.5mm × 2.1mm
- Cable Length: Approximately 10–15cm
- Easy connection for Arduino boards and modules
- Sturdy design for repeated use
- Lightweight and portable
- Plug-and-play power connection
KSh 50.009V Battery Connector with DC Plug
KSh 50.00 -
9×15 cm Double-Sided Prototype PCB
The 9×15 cm Double-Sided Prototype PCB from Liqman Electronics is a durable prototyping board for building and testing electronic circuits.
Key Features:
- Size: 9 × 15 cm
- Double-sided PCB design
- Standard 2.54mm hole pitch
- Durable FR-4 fiberglass construction
- Suitable for through-hole components
- Compatible with resistors, capacitors, ICs, headers and connectors
- Suitable for Arduino, ESP32 and Raspberry Pi projects
- Ideal for prototyping, robotics, IoT and DIY electronics
KSh 200.009×15 cm Double-Sided Prototype PCB
KSh 200.00 -
Active Buzzer Module
Key Features
- Operating Voltage: 3.3V–5V DC
- Built-in oscillator
- No PWM required for continuous tone generation
- Current Consumption: <30mA
- Easy interface with digital pins
- Compact PCB design with connection pins
- Loud and clear tone
- Suitable for microcontroller projects
KSh 20.00Active Buzzer Module
KSh 20.00 -
Active Buzzer Module KY-012
An Active Buzzer Module is a compact sound-generating device that produces a fixed-frequency tone when powered. Unlike passive buzzers, it has a built-in oscillator, so it doesn’t need external signals to operate—just apply DC voltage and it buzzes!
KSh 100.00Active Buzzer Module KY-012
KSh 100.00 -
Air Pump DC12V
The Air Pump DC12V from Liqman Electronics is a compact and versatile electric air pump designed to provide consistent airflow for automotive, home, pneumatic, aquarium, and DIY applications.
Key Features
- 12V DC operating voltage
- Compact and portable design
- Consistent airflow for various applications
- Low power consumption
- Suitable for continuous or intermittent operation
- Durable construction for reliable performance
- Designed for low-pressure airflow applications
- Suitable for automotive and DIY projects
KSh 550.00Air Pump DC12V
KSh 550.00 -
AMS1117-3.3V Voltage Regulator
Shop AMS1117-3.3V Voltage Regulator Module from Liqman Electronics for stable 3.3V power in ESP32, ESP8266, Arduino, and DIY electronics projects.
Key Features
- AMS1117-3.3 regulator IC
- Input voltage: 4.5V–12V DC
- Fixed 3.3V DC output
- Output current: up to 800mA
- Onboard filter capacitors
- Stable regulated output
- Compact PCB design
- Breadboard-friendly
- Easy to integrate into DIY circuits
- Suitable for 3.3V microcontrollers and sensors
KSh 30.00AMS1117-3.3V Voltage Regulator
KSh 30.00











