- “Resistors – 220Ω, 330Ω, 1KΩ, 4.7KΩ (1/4 Watt)” already exists in your wishlist
-
McNamum Wheel Aluminum Car Chassis 4WD
The McNamum Wheel Aluminum Car Chassis 4WD from Liqman Electronics is a durable 4WD robotic platform designed for robotics, automation, STEM and DIY projects. Its aluminum alloy frame and four Mecanum wheels provide omnidirectional movement, allowing forward, backward, sideways, diagonal and rotational motion.
Key Features:
- Durable aluminum alloy chassis
- Four-wheel drive (4WD) configuration
- Four Mecanum wheels
- Omnidirectional movement
- Supports lateral, diagonal and rotational motion
- Lightweight and robust design
- Multiple mounting points for components
- Compatible with Arduino, ESP32 and Raspberry Pi
- Easy to assemble and customize
- Suitable for robotics competitions and research
KSh 2,500.00McNamum Wheel Aluminum Car Chassis 4WD
KSh 2,500.00 -
Laser Module 6nm 5V KY-008
The Laser Module 6nm 5V KY-008 from Liqman Electronics is a compact red laser transmitter for Arduino, ESP32, Raspberry Pi, robotics and educational electronics projects. It produces a focused red laser beam through a simple 3-pin interface.
Key Features:
- Red laser diode
- 5V DC operating voltage
- Output power below 5mW
- Operating current below 40mA
- Simple 3-pin interface
- Compact and lightweight design
- Digital control through a microcontroller
- Compatible with Arduino, ESP32 and Raspberry Pi
- Suitable for object detection and alignment projects
- Ideal for STEM and optical experiments
KSh 200.00Laser Module 6nm 5V KY-008
KSh 200.00 -
Raspberry PI Mini ProMicro RP2040
The Raspberry PI Mini ProMicro RP2040 from Liqman Electronics is a compact development board based on the RP2040 dual-core microcontroller. With a ProMicro form factor, USB connectivity, GPIO, ADC, PWM, UART, I2C and SPI support, it is suitable for embedded systems, robotics, IoT, automation and USB projects.
Key Features:
- RP2040 dual-core ARM Cortex-M0+ processor
- Clock speed up to 133 MHz
- 264 KB SRAM
- Typically 2 MB flash memory
- Compact ProMicro form factor
- Up to 18 multifunction GPIO pins
- Up to 4 ADC channels
- PWM support
- UART, I2C, SPI and USB interfaces
- Compatible with Arduino IDE, MicroPython, CircuitPython and PlatformIO
- Supports C/C++ programming
- Suitable for robotics, IoT, USB and embedded projects
KSh 1,200.00Raspberry PI Mini ProMicro RP2040
KSh 1,200.00 -
Current Sensor Module 5A – ZMCT103C
The Current Sensor Module – ZMCT103C from Liqman Electronics is a compact AC current measurement module based on a precision current transformer. It provides electrical isolation while measuring AC current, making it suitable for energy monitoring, automation, Arduino, ESP32 and other electronics projects.
Key Features:
- ZMCT103C current transformer
- Rated input current: 5A AC
- Linear measurement range: 0–10A AC
- Rated output: 5mA at 5A input
- 1000:1 turns ratio
- Accuracy class 0.2
- Up to 4500V isolation voltage
- 50Hz / 60Hz operating frequency
- Analog signal output
- PCB-mount design
- Epoxy resin encapsulation
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
KSh 500.00Current Sensor Module 5A – ZMCT103C
KSh 500.00 -
ZMPT101B Single-Phase AC Voltage Sensor Module
The ZMPT101B Single-Phase AC Voltage Sensor Module from Liqman Electronics is a precision AC voltage measurement module with transformer isolation for safer voltage monitoring. It provides an adjustable analog output for Arduino, ESP32, ESP8266, STM32, Raspberry Pi Pico and other microcontroller projects.
Key Features:
- ZMPT101B precision voltage transformer
- Single-phase AC voltage sensing
- Transformer-based electrical isolation
- 5V DC operating voltage
- Adjustable sensitivity using multi-turn potentiometer
- Analog output for microcontroller ADC inputs
- Onboard operational amplifier signal conditioning
- 50Hz–60Hz frequency range
- Compact 49mm × 20mm design
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
- Suitable for energy monitoring, smart metering and automation
KSh 500.00 -
DC Voltage Sensor Detection Module
The DC Voltage Sensor Detection Module from Liqman Electronics is a compact voltage monitoring module for measuring DC voltage and providing a proportional analog signal to microcontrollers. It is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi Pico, battery monitoring, solar systems and robotics.
Key Features:
- DC voltage measurement up to 25V
- 5:1 voltage divider ratio
- Analog output proportional to input voltage
- 3.3V–5V compatible
- Simple AO, VCC and GND interface
- Compact 25 × 13mm design
- FR-4 fiberglass PCB
- Through-hole connection
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
- Suitable for battery, solar and power supply monitoring
KSh 200.00DC Voltage Sensor Detection Module
KSh 200.00 -
DS1302 RTC MODULE
The DS1302 RTC MODULE from Liqman Electronics is a compact real-time clock module for accurate time and date tracking in electronic projects. It features battery backup and a simple 3-wire interface.
Key Features:
- DS1302 real-time clock IC
- 12-hour and 24-hour formats
- Automatic leap-year adjustment
- 31-byte battery-backed RAM
- 3-wire serial interface
- Supports 3V CR2032 battery
- 32.768 kHz quartz crystal
- 2.0V–5.5V DC supply
- Arduino and ESP32 compatible
- Ideal for clocks, data logging and automation
KSh 200.00DS1302 RTC MODULE
KSh 200.00 -
LCD1602 Shell Case Holder
The LCD1602 Shell Case Holder from Liqman Electronics is a protective enclosure for standard 16×2 LCD display modules.
Key Features:
- Designed for LCD1602 16×2 displays
- Protective plastic enclosure
- Lightweight and durable
- Clear display viewing area
- Easy mounting and installation
- Supports parallel and I2C LCD configurations
- Neat and professional appearance
- Suitable for Arduino, ESP32, robotics and DIY projects
KSh 150.00LCD1602 Shell Case Holder
KSh 150.00 -
LCD 1602 Display Module (16×2 Alphanumeric Display)
The LCD 1602 Display Module (16×2 Alphanumeric Display) from Liqman Electronics is a compact display for showing text, numbers and symbols.
Key Features:
- 16 characters × 2 lines
- HD44780-compatible controller
- 5V DC operation
- 5 × 8 dot character matrix
- LED backlight
- Blue/white or yellow-green options
- Parallel interface
- Optional I2C adapter support
- Custom character support
- Compatible with Arduino, ESP32, Raspberry Pi and other microcontrollers
KSh 350.00 -
CH341A USB EEPROM & BIOS Programmer
The CH341A USB EEPROM & BIOS Programmer from Liqman Electronics is a compact programmer for reading, writing and erasing compatible EEPROM and BIOS chips.
Key Features:
- Supports 24 and 25 series EEPROM chips
- BIOS programming for compatible motherboards and laptops
- USB interface for PC connectivity
- Read, write and erase functions
- Includes software and driver for Windows
- Compact and portable design
- Suitable for EEPROM and BIOS repair
- Useful for electronics repair and development
KSh 1,000.00CH341A USB EEPROM & BIOS Programmer
KSh 1,000.00 -
3S 40A 18650 BMS with Cell Balancing
The 3S 40A 18650 BMS with Cell Balancing from Liqman Electronics is a protection board for 3-series lithium-ion and Li-Po battery packs.
Key Features:
- 3S configuration for 11.1V nominal battery packs
- 40A continuous current rating
- Cell balancing for three battery cells
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Temperature monitoring
- Compatible with 18650 lithium-ion and Li-Po cells
- Suitable for robotics, power tools and DIY battery packs
KSh 500.003S 40A 18650 BMS with Cell Balancing
KSh 500.00











