- “Resistors – 220Ω, 330Ω, 1KΩ, 4.7KΩ (1/4 Watt)” already exists in your wishlist
-
4S 40A 18650 BMS with Cell Balancing
The 4S 40A 18650 BMS with Cell Balancing from Liqman Electronics is a protection board for 4-series lithium-ion and Li-Po battery packs.
Key Features:
- 4S configuration for 14.8V nominal battery packs
- 40A continuous current rating
- Cell balancing for four battery cells
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Temperature monitoring
- Compatible with 18650 lithium-ion and Li-Po cells
- Suitable for power tools, robotics, e-bikes and DIY battery packs
KSh 500.004S 40A 18650 BMS with Cell Balancing
KSh 500.00 -
9×15 cm Double-Sided Prototype PCB
The 9×15 cm Double-Sided Prototype PCB from Liqman Electronics is a durable prototyping board for building and testing electronic circuits.
Key Features:
- Size: 9 × 15 cm
- Double-sided PCB design
- Standard 2.54mm hole pitch
- Durable FR-4 fiberglass construction
- Suitable for through-hole components
- Compatible with resistors, capacitors, ICs, headers and connectors
- Suitable for Arduino, ESP32 and Raspberry Pi projects
- Ideal for prototyping, robotics, IoT and DIY electronics
KSh 200.009×15 cm Double-Sided Prototype PCB
KSh 200.00 -
TP4056 USB Type-C 1A Battery Charging Board
The TP4056 USB Type-C 1A Battery Charging Board from Liqman Electronics is a compact charging module for single-cell 3.7V lithium-ion and Li-Po batteries.
Key Features:
- USB Type-C charging input
- 1A charging current
- Designed for single-cell 3.7V lithium batteries
- TP4056 charging IC
- Constant-current/constant-voltage (CC/CV) charging
- Charging and full-charge LED indicators
- Compact PCB design
- Suitable for portable electronics and DIY projects
- Ideal for compatible Arduino, ESP32 and IoT applications
KSh 100.00TP4056 USB Type-C 1A Battery Charging Board
KSh 100.00 -
7S 24V 25A Smart BMS (Balanced, Temp-Controlled)
The 7S 24V 25A Smart BMS (Balanced, Temp-Controlled) is a battery management system from Liqman Electronics designed to protect and balance 7-series lithium battery packs.
Key Features:
- 7S battery configuration
- 25A continuous current rating
- Cell voltage balancing
- Temperature monitoring and protection
- Overcharge and over-discharge protection
- Overcurrent and short-circuit protection
- 10-MOSFET design
- Pre-wired balance and power cables
- Suitable for compatible Li-ion and LiFePO₄ battery packs
KSh 1,500.007S 24V 25A Smart BMS (Balanced, Temp-Controlled)
KSh 1,500.00 -
12V 1 Channel Relay Module Wireless Remote Control Switch
The 12V 1 Channel Relay Module Wireless Remote Control Switch from Liqman Electronics provides reliable wireless ON/OFF control of electrical devices and loads, making it suitable for automation, security, and remote switching applications.
Key Features
- 12V DC operating voltage
- 1-channel relay output for ON/OFF control
- Wireless remote control operation
- Stable signal reception for reliable switching
- Supports AC and DC loads within the relay rating
- Compact and durable PCB design
- Supports common switching modes such as momentary, toggle, and latched operation
- Suitable for automation, security, access control, and DIY projects
KSh 1,200.00 -
TCS3200 / TCS230 Color Recognition Sensor
The TCS3200 / TCS230 Color Recognition Sensor from Liqman Electronics is a versatile color detection module that measures red, green, blue, and clear light intensity through frequency output for use with Arduino, ESP32, Raspberry Pi, and other embedded systems.
Key Features
- RGB color recognition using filtered photodiode arrays
- Frequency output proportional to light intensity
- Selectable output frequency scaling
- Integrated white LEDs for consistent target illumination
- Fast response for real-time color detection
- Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers
- Suitable for color sorting, robotics, automation, and educational projects
KSh 1,100.00TCS3200 / TCS230 Color Recognition Sensor
KSh 1,100.00 -
Egg Incubator Controller
The Egg Incubator Controller Thermostat Hygrostat – XM-18 from Liqman Electronics is an automatic temperature and humidity control system designed to maintain stable incubation conditions for poultry, reptile, and other small animal eggs.
Key Features
- Full automatic temperature control
- Humidity regulation with hygrostat function
- Digital display for real-time temperature and humidity monitoring
- Programmable incubation stages and setpoints
- High-precision digital sensors
- Compatible with incubator heaters, fans, and humidifiers
- Designed for continuous and reliable operation
- Suitable for home hatcheries, small farms, educational, and research applications
KSh 5,000.00Egg Incubator Controller
KSh 5,000.00 -
Solder Wire 0.8mm 100g 63/37
The Solder Wire 0.8mm 100g 63/37 from Liqman Electronics is a leaded 63/37 eutectic solder wire designed for precise, smooth, and reliable soldering of electronic components, PCB assemblies, and circuit connections.
Key Features
- 63% tin and 37% lead eutectic solder composition
- 0.8mm diameter for precise soldering
- 183°C melting point for smooth and controlled soldering
- Excellent wetting and solder flow
- Consistent diameter for reliable application
- 100g spool for multiple electronics projects
- Suitable for through-hole and surface-mount components
- Ideal for PCB assembly, repairs, prototyping, and DIY electronics
KSh 900.00Solder Wire 0.8mm 100g 63/37
KSh 900.00 -
Air Pump DC12V
The Air Pump DC12V from Liqman Electronics is a compact and versatile electric air pump designed to provide consistent airflow for automotive, home, pneumatic, aquarium, and DIY applications.
Key Features
- 12V DC operating voltage
- Compact and portable design
- Consistent airflow for various applications
- Low power consumption
- Suitable for continuous or intermittent operation
- Durable construction for reliable performance
- Designed for low-pressure airflow applications
- Suitable for automotive and DIY projects
KSh 550.00Air Pump DC12V
KSh 550.00











