-
TP4056 USB Type-C 1A Battery Charging Board
The TP4056 USB Type-C 1A Battery Charging Board from Liqman Electronics is a compact charging module for single-cell 3.7V lithium-ion and Li-Po batteries.
Key Features:
- USB Type-C charging input
- 1A charging current
- Designed for single-cell 3.7V lithium batteries
- TP4056 charging IC
- Constant-current/constant-voltage (CC/CV) charging
- Charging and full-charge LED indicators
- Compact PCB design
- Suitable for portable electronics and DIY projects
- Ideal for compatible Arduino, ESP32 and IoT applications
KSh 100.00TP4056 USB Type-C 1A Battery Charging Board
KSh 100.00 -
7S 24V 25A Smart BMS (Balanced, Temp-Controlled)
The 7S 24V 25A Smart BMS (Balanced, Temp-Controlled) is a battery management system from Liqman Electronics designed to protect and balance 7-series lithium battery packs.
Key Features:
- 7S battery configuration
- 25A continuous current rating
- Cell voltage balancing
- Temperature monitoring and protection
- Overcharge and over-discharge protection
- Overcurrent and short-circuit protection
- 10-MOSFET design
- Pre-wired balance and power cables
- Suitable for compatible Li-ion and LiFePO₄ battery packs
KSh 1,500.007S 24V 25A Smart BMS (Balanced, Temp-Controlled)
KSh 1,500.00 -
12V 1 Channel Relay Module Wireless Remote Control Switch
The 12V 1 Channel Relay Module Wireless Remote Control Switch from Liqman Electronics provides reliable wireless ON/OFF control of electrical devices and loads, making it suitable for automation, security, and remote switching applications.
Key Features
- 12V DC operating voltage
- 1-channel relay output for ON/OFF control
- Wireless remote control operation
- Stable signal reception for reliable switching
- Supports AC and DC loads within the relay rating
- Compact and durable PCB design
- Supports common switching modes such as momentary, toggle, and latched operation
- Suitable for automation, security, access control, and DIY projects
KSh 1,200.00 -
TCS3200 / TCS230 Color Recognition Sensor
The TCS3200 / TCS230 Color Recognition Sensor from Liqman Electronics is a versatile color detection module that measures red, green, blue, and clear light intensity through frequency output for use with Arduino, ESP32, Raspberry Pi, and other embedded systems.
Key Features
- RGB color recognition using filtered photodiode arrays
- Frequency output proportional to light intensity
- Selectable output frequency scaling
- Integrated white LEDs for consistent target illumination
- Fast response for real-time color detection
- Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers
- Suitable for color sorting, robotics, automation, and educational projects
KSh 1,100.00TCS3200 / TCS230 Color Recognition Sensor
KSh 1,100.00 -
Egg Incubator Controller
The Egg Incubator Controller Thermostat Hygrostat – XM-18 from Liqman Electronics is an automatic temperature and humidity control system designed to maintain stable incubation conditions for poultry, reptile, and other small animal eggs.
Key Features
- Full automatic temperature control
- Humidity regulation with hygrostat function
- Digital display for real-time temperature and humidity monitoring
- Programmable incubation stages and setpoints
- High-precision digital sensors
- Compatible with incubator heaters, fans, and humidifiers
- Designed for continuous and reliable operation
- Suitable for home hatcheries, small farms, educational, and research applications
KSh 5,000.00Egg Incubator Controller
KSh 5,000.00 -
Solder Wire 0.8mm 100g 63/37
The Solder Wire 0.8mm 100g 63/37 from Liqman Electronics is a leaded 63/37 eutectic solder wire designed for precise, smooth, and reliable soldering of electronic components, PCB assemblies, and circuit connections.
Key Features
- 63% tin and 37% lead eutectic solder composition
- 0.8mm diameter for precise soldering
- 183°C melting point for smooth and controlled soldering
- Excellent wetting and solder flow
- Consistent diameter for reliable application
- 100g spool for multiple electronics projects
- Suitable for through-hole and surface-mount components
- Ideal for PCB assembly, repairs, prototyping, and DIY electronics
KSh 900.00Solder Wire 0.8mm 100g 63/37
KSh 900.00 -
Air Pump DC12V
The Air Pump DC12V from Liqman Electronics is a compact and versatile electric air pump designed to provide consistent airflow for automotive, home, pneumatic, aquarium, and DIY applications.
Key Features
- 12V DC operating voltage
- Compact and portable design
- Consistent airflow for various applications
- Low power consumption
- Suitable for continuous or intermittent operation
- Durable construction for reliable performance
- Designed for low-pressure airflow applications
- Suitable for automotive and DIY projects
KSh 550.00Air Pump DC12V
KSh 550.00 -
Solenoid Lock (1240 12V DC 0.8A 9.6W)
The Solenoid Lock (1240 12V DC 0.8A 9.6W) from Liqman Electronics is a compact electromagnetic locking actuator designed for electronic access control, smart locks, cabinets, doors, and DIY security automation projects.
Key Features
- 12V DC operating voltage
- 0.8A current rating
- 9.6W power consumption
- Compact 55 × 28 × 30 mm design
- Durable metal casing and coil construction
- Fast electromagnetic response
- Suitable for electronic access control systems
- Compatible with relay modules and microcontroller-based projects
- Suitable for Arduino, ESP32, and other control system
KSh 800.00Solenoid Lock (1240 12V DC 0.8A 9.6W)
KSh 800.00 -
USB to TTL Download – FT232 Type-C
The USB to TTL Download – FT232 Type-C from Liqman Electronics is a reliable USB-to-serial interface designed for programming, debugging, firmware flashing, and UART communication with microcontrollers and embedded systems.
Key Features
- FT232 USB-to-TTL serial interface
- Type-C USB connector
- Supports 3.3V and 5V TTL logic levels
- Data transmission speeds up to 3 Mbps
- Clearly labelled TXD, RXD, VCC, and GND connections
- Optional RTS/CTS flow control
- Suitable for Arduino, ESP32, ESP8266, ESP32-CAM, STM32, and other UART devices
- Compatible with Windows, macOS, and Linux systems
- Compact and lightweight design
KSh 350.00USB to TTL Download – FT232 Type-C
KSh 350.00 -
CC1101 868MHZ Wireless Transceiver Module
CC1101 868MHz Wireless Transceiver Module from Liqman Electronics for reliable low-power wireless communication and IoT projects.
Key Features
- 868MHz ISM frequency
- Texas Instruments CC1101 wireless transceiver
- Low-power RF communication
- Programmable output power and data rate
- Supports FSK, GFSK, ASK, and OOK modulation
- SPI communication interface
- GDO0 and GDO2 digital interfaces
- Compatible with Arduino, ESP32, STM32, and Raspberry Pi
- Suitable for point-to-point and sensor network applications
- Compact design for embedded projects
KSh 1,000.00CC1101 868MHZ Wireless Transceiver Module
KSh 1,000.00 -
ESP32-CAM OV3660 Camera
ESP32-CAM OV3660 Camera Module from Liqman Electronics for wireless imaging, IoT, surveillance, and embedded vision projects.
Key Features
- ESP32 dual-core microcontroller
- OV3660 3MP camera sensor
- Image resolution up to 2048 × 1536
- Built-in Wi-Fi and Bluetooth
- 4MB Flash memory
- Built-in microSD card slot
- Multiple GPIO pins for external components
- Supports JPEG image compression
- Adjustable image settings including brightness, contrast, and exposure
- Compatible with Arduino IDE, ESP-IDF, and MicroPython
- Suitable for battery-powered and remote applications
KSh 2,200.00ESP32-CAM OV3660 Camera
KSh 2,200.00











