-
DC Voltage Sensor Detection Module
The DC Voltage Sensor Detection Module from Liqman Electronics is a compact voltage monitoring module for measuring DC voltage and providing a proportional analog signal to microcontrollers. It is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi Pico, battery monitoring, solar systems and robotics.
Key Features:
- DC voltage measurement up to 25V
- 5:1 voltage divider ratio
- Analog output proportional to input voltage
- 3.3V–5V compatible
- Simple AO, VCC and GND interface
- Compact 25 × 13mm design
- FR-4 fiberglass PCB
- Through-hole connection
- Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi Pico
- Suitable for battery, solar and power supply monitoring
KSh 200.00DC Voltage Sensor Detection Module
KSh 200.00 -
DS1302 RTC MODULE
The DS1302 RTC MODULE from Liqman Electronics is a compact real-time clock module for accurate time and date tracking in electronic projects. It features battery backup and a simple 3-wire interface.
Key Features:
- DS1302 real-time clock IC
- 12-hour and 24-hour formats
- Automatic leap-year adjustment
- 31-byte battery-backed RAM
- 3-wire serial interface
- Supports 3V CR2032 battery
- 32.768 kHz quartz crystal
- 2.0V–5.5V DC supply
- Arduino and ESP32 compatible
- Ideal for clocks, data logging and automation
KSh 200.00DS1302 RTC MODULE
KSh 200.00 -
9×15 cm Double-Sided Prototype PCB
The 9×15 cm Double-Sided Prototype PCB from Liqman Electronics is a durable prototyping board for building and testing electronic circuits.
Key Features:
- Size: 9 × 15 cm
- Double-sided PCB design
- Standard 2.54mm hole pitch
- Durable FR-4 fiberglass construction
- Suitable for through-hole components
- Compatible with resistors, capacitors, ICs, headers and connectors
- Suitable for Arduino, ESP32 and Raspberry Pi projects
- Ideal for prototyping, robotics, IoT and DIY electronics
KSh 200.009×15 cm Double-Sided Prototype PCB
KSh 200.00 -
PIR Motion Sensor
PIR Motion Sensor module detects movement with up to 7m range & 120° angle. Ideal for Arduino, security, smart home, and automatic lighting projects.
KSh 200.00PIR Motion Sensor
KSh 200.00 -
Raindrop Detection Sensor Module
Raindrop Sensor is a tool used for sensing rain. It consists of two modules, a rain board that detects the rain and a control module, which compares the analog value, and converts it to a digital value
KSh 200.00Raindrop Detection Sensor Module
KSh 200.00 -
Breadboard 830 points
830-Point Solderless Breadboard. This is a premium solderless breadboard with 830 tie points, perfect for prototyping and testing electronic circuits without soldering. It’s widely used in educational kits, DIY electronics, and professional development environments.
KSh 200.00Breadboard 830 points
KSh 200.00 -
Flexible Breadboard Jumper Wires- male to male
65pcs Flexible Breadboard Jumper Wires – Male to Male. A must-have for any electronics enthusiast, this jumper wire pack includes 65 flexible, pre-stripped wires designed for seamless prototyping on breadboards and development boards like Arduino and Raspberry Pi.
KSh 200.00 -
IR Remote Control Module+IR Telecontrol+Receiver
This compact infrared (IR) control kit includes a remote transmitter and receiver module, ideal for wireless control of electronic devices using IR signals. It’s a great choice for DIY electronics, robotics, and home automation projects.
KSh 200.00 -
Microphone Sound Sensor Module KY-038
Microphone Sound Sensor Module KY-038 from Liqman Electronics is an Arduino-compatible sound detection module with analog and digital outputs, ideal for sound-activated, voice, and noise-monitoring projects
KSh 200.00Microphone Sound Sensor Module KY-038
KSh 200.00 -
IR Infrared sensor module
Infrared Sensor Module has built-in IR transmitter and IR receiver that sends out IR rays and looks for reflected IR rays to detect presence of any obstacle in front of the sensor module.
KSh 200.00IR Infrared sensor module
KSh 200.00 -
Soil Moisture Detection Humidity Sensor Module
Soil Moisture Sensor Hygrometer Soil Moisture Modules Compatible with Arduino,Rsp32, Nodemcu, Raspberry pi.
KSh 200.00 -
4 x AA Battery Holder Box with DC
The 4 x AA Battery Holder Box with DC from Liqman Electronics is a compact portable power holder for Arduino, ESP32, robotics, LED lighting and other low-power electronics projects.
Key Features:
- Holds 4 × AA batteries
- Built-in DC output connector
- Approximately 6V with alkaline batteries
- Lightweight and portable
- Durable ABS plastic construction
- Stable battery contact terminals
- Easy plug-and-play connection
- Suitable for Arduino, ESP32 and sensor modules
- Ideal for portable DIY electronics
KSh 150.004 x AA Battery Holder Box with DC
KSh 150.00











