-
-
4 x AA Battery Holder Box with DC
The 4 x AA Battery Holder Box with DC from Liqman Electronics is a compact portable power holder for Arduino, ESP32, robotics, LED lighting and other low-power electronics projects.
Key Features:
- Holds 4 × AA batteries
- Built-in DC output connector
- Approximately 6V with alkaline batteries
- Lightweight and portable
- Durable ABS plastic construction
- Stable battery contact terminals
- Easy plug-and-play connection
- Suitable for Arduino, ESP32 and sensor modules
- Ideal for portable DIY electronics
KSh 150.004 x AA Battery Holder Box with DC
KSh 150.00 -
2 x 18650 Cell Holder Case
The 2 x 18650 Cell Holder Case from Liqman Electronics is a compact battery holder with an ON/OFF switch for powering Arduino, ESP32, robotics, IoT and other portable electronics projects.
Key Features:
- Holds 2 × 18650 Li-ion cells
- Built-in ON/OFF switch
- Durable ABS plastic housing
- Pre-attached leads for easy wiring
- Supports series or parallel configurations depending on model
- Lightweight and portable
- Stable battery contact terminals
- Suitable for rechargeable battery systems
- Ideal for DIY electronics and prototyping
KSh 100.002 x 18650 Cell Holder Case
KSh 100.00 -
CH341A USB EEPROM & BIOS Programmer
The CH341A USB EEPROM & BIOS Programmer from Liqman Electronics is a compact programmer for reading, writing and erasing compatible EEPROM and BIOS chips.
Key Features:
- Supports 24 and 25 series EEPROM chips
- BIOS programming for compatible motherboards and laptops
- USB interface for PC connectivity
- Read, write and erase functions
- Includes software and driver for Windows
- Compact and portable design
- Suitable for EEPROM and BIOS repair
- Useful for electronics repair and development
KSh 1,000.00CH341A USB EEPROM & BIOS Programmer
KSh 1,000.00 -
9×15 cm Double-Sided Prototype PCB
The 9×15 cm Double-Sided Prototype PCB from Liqman Electronics is a durable prototyping board for building and testing electronic circuits.
Key Features:
- Size: 9 × 15 cm
- Double-sided PCB design
- Standard 2.54mm hole pitch
- Durable FR-4 fiberglass construction
- Suitable for through-hole components
- Compatible with resistors, capacitors, ICs, headers and connectors
- Suitable for Arduino, ESP32 and Raspberry Pi projects
- Ideal for prototyping, robotics, IoT and DIY electronics
KSh 200.009×15 cm Double-Sided Prototype PCB
KSh 200.00 -
Solder Wire 0.8mm 100g 63/37
The Solder Wire 0.8mm 100g 63/37 from Liqman Electronics is a leaded 63/37 eutectic solder wire designed for precise, smooth, and reliable soldering of electronic components, PCB assemblies, and circuit connections.
Key Features
- 63% tin and 37% lead eutectic solder composition
- 0.8mm diameter for precise soldering
- 183°C melting point for smooth and controlled soldering
- Excellent wetting and solder flow
- Consistent diameter for reliable application
- 100g spool for multiple electronics projects
- Suitable for through-hole and surface-mount components
- Ideal for PCB assembly, repairs, prototyping, and DIY electronics
KSh 900.00Solder Wire 0.8mm 100g 63/37
KSh 900.00 -
Hot Melt Glue Stick (11mm x 190mm)
Hot Melt Glue Stick 11mm x 190mm from Liqman Electronics for quick bonding, repairs, crafts, packaging, and DIY projects.
Key Features
- 11mm diameter x 190mm length
- Compatible with standard hot glue guns
- Strong and fast-setting adhesive
- Clear finish after application
- Suitable for wood, plastic, fabric, ceramics, and metal
- Easy to apply and handle
- Suitable for crafts, repairs, packaging, and DIY projects
KSh 20.00Hot Melt Glue Stick (11mm x 190mm)
KSh 20.00 -
Single-Sided Copper Clad PCB Board (10 x 15 cm, 1.5mm FR4 Glass Fiber)
Single-Sided Copper Clad PCB Board 10 x 15 cm from Liqman Electronics for prototyping, circuit etching, and DIY electronics projects.
Key Features
- Board size: 10 x 15 cm
- Thickness: 1.5 mm
- FR4 glass fiber construction
- Single-sided copper clad layer
- Durable and stable base material
- Good electrical insulation
- Suitable for custom circuit designs
- Easy to use for PCB etching and prototyping
- Suitable for educational and DIY electronics projects
KSh 120.00 -
9V Battery Connector with DC Plug
Key Features
- Connector Type: 9V snap-on battery clip to DC barrel jack
- DC Plug Size: 5.5mm × 2.1mm
- Cable Length: Approximately 10–15cm
- Easy connection for Arduino boards and modules
- Sturdy design for repeated use
- Lightweight and portable
- Plug-and-play power connection
KSh 50.009V Battery Connector with DC Plug
KSh 50.00 -
9V Battery Connector
Shop 9V Battery Connector Snap-On Clip with Wires from Liqman Electronics for Arduino, breadboards, PCBs, robotics, and DIY electronics projects.
Key Features
- Type: Snap-on 9V battery connector
- Wires: Red (+) and black (–)
- Wire Length: Approximately 10–15cm
- Strong, durable plastic cap
- Secure battery connection
- Easy to use with breadboards and PCBs
- Compatible with standard 9V batteries
- Suitable for small electronic circuits
KSh 30.009V Battery Connector
KSh 30.00 -
Breadboard Power Supply Module 3.3V 5V
Breadboard Power Supply Module – 3.3V/5V Dual Output. This handy module provides regulated 3.3V and 5V DC outputs, making it perfect for powering breadboard-based circuits and microcontroller projects.
KSh 150.00Breadboard Power Supply Module 3.3V 5V
KSh 150.00











