-
Breadboard 830 points
830-Point Solderless Breadboard. This is a premium solderless breadboard with 830 tie points, perfect for prototyping and testing electronic circuits without soldering. It’s widely used in educational kits, DIY electronics, and professional development environments.
KSh 200.00Breadboard 830 points
KSh 200.00 -
MALE TO MALE jumper wires 40pcs
MALE TO MALE jumper wires 40pcs. Perfect for prototyping and DIY electronics, this set of 40 male-to-male jumper wires is a staple for any maker’s toolkit. Designed for seamless breadboard and microcontroller connections, these wires offer flexibility, durability, and ease of use.
KSh 150.00MALE TO MALE jumper wires 40pcs
KSh 150.00 -
Single-Sided Copper Clad PCB Board (10 x 15 cm, 1.5mm FR4 Glass Fiber)
Single-Sided Copper Clad PCB Board 10 x 15 cm from Liqman Electronics for prototyping, circuit etching, and DIY electronics projects.
Key Features
- Board size: 10 x 15 cm
- Thickness: 1.5 mm
- FR4 glass fiber construction
- Single-sided copper clad layer
- Durable and stable base material
- Good electrical insulation
- Suitable for custom circuit designs
- Easy to use for PCB etching and prototyping
- Suitable for educational and DIY electronics projects
KSh 120.00 -
9V Battery Connector
Shop 9V Battery Connector Snap-On Clip with Wires from Liqman Electronics for Arduino, breadboards, PCBs, robotics, and DIY electronics projects.
Key Features
- Type: Snap-on 9V battery connector
- Wires: Red (+) and black (–)
- Wire Length: Approximately 10–15cm
- Strong, durable plastic cap
- Secure battery connection
- Easy to use with breadboards and PCBs
- Compatible with standard 9V batteries
- Suitable for small electronic circuits
KSh 30.009V Battery Connector
KSh 30.00 -
-
4 x AA Battery Holder Box with DC
The 4 x AA Battery Holder Box with DC from Liqman Electronics is a compact portable power holder for Arduino, ESP32, robotics, LED lighting and other low-power electronics projects.
Key Features:
- Holds 4 × AA batteries
- Built-in DC output connector
- Approximately 6V with alkaline batteries
- Lightweight and portable
- Durable ABS plastic construction
- Stable battery contact terminals
- Easy plug-and-play connection
- Suitable for Arduino, ESP32 and sensor modules
- Ideal for portable DIY electronics
KSh 150.004 x AA Battery Holder Box with DC
KSh 150.00 -
2 x 18650 Cell Holder Case
The 2 x 18650 Cell Holder Case from Liqman Electronics is a compact battery holder with an ON/OFF switch for powering Arduino, ESP32, robotics, IoT and other portable electronics projects.
Key Features:
- Holds 2 × 18650 Li-ion cells
- Built-in ON/OFF switch
- Durable ABS plastic housing
- Pre-attached leads for easy wiring
- Supports series or parallel configurations depending on model
- Lightweight and portable
- Stable battery contact terminals
- Suitable for rechargeable battery systems
- Ideal for DIY electronics and prototyping
KSh 100.002 x 18650 Cell Holder Case
KSh 100.00 -
CH341A USB EEPROM & BIOS Programmer
The CH341A USB EEPROM & BIOS Programmer from Liqman Electronics is a compact programmer for reading, writing and erasing compatible EEPROM and BIOS chips.
Key Features:
- Supports 24 and 25 series EEPROM chips
- BIOS programming for compatible motherboards and laptops
- USB interface for PC connectivity
- Read, write and erase functions
- Includes software and driver for Windows
- Compact and portable design
- Suitable for EEPROM and BIOS repair
- Useful for electronics repair and development
KSh 1,000.00CH341A USB EEPROM & BIOS Programmer
KSh 1,000.00 -
9×15 cm Double-Sided Prototype PCB
The 9×15 cm Double-Sided Prototype PCB from Liqman Electronics is a durable prototyping board for building and testing electronic circuits.
Key Features:
- Size: 9 × 15 cm
- Double-sided PCB design
- Standard 2.54mm hole pitch
- Durable FR-4 fiberglass construction
- Suitable for through-hole components
- Compatible with resistors, capacitors, ICs, headers and connectors
- Suitable for Arduino, ESP32 and Raspberry Pi projects
- Ideal for prototyping, robotics, IoT and DIY electronics
KSh 200.009×15 cm Double-Sided Prototype PCB
KSh 200.00 -
Solder Wire 0.8mm 100g 63/37
The Solder Wire 0.8mm 100g 63/37 from Liqman Electronics is a leaded 63/37 eutectic solder wire designed for precise, smooth, and reliable soldering of electronic components, PCB assemblies, and circuit connections.
Key Features
- 63% tin and 37% lead eutectic solder composition
- 0.8mm diameter for precise soldering
- 183°C melting point for smooth and controlled soldering
- Excellent wetting and solder flow
- Consistent diameter for reliable application
- 100g spool for multiple electronics projects
- Suitable for through-hole and surface-mount components
- Ideal for PCB assembly, repairs, prototyping, and DIY electronics
KSh 900.00Solder Wire 0.8mm 100g 63/37
KSh 900.00 -
Hot Melt Glue Stick (11mm x 190mm)
Hot Melt Glue Stick 11mm x 190mm from Liqman Electronics for quick bonding, repairs, crafts, packaging, and DIY projects.
Key Features
- 11mm diameter x 190mm length
- Compatible with standard hot glue guns
- Strong and fast-setting adhesive
- Clear finish after application
- Suitable for wood, plastic, fabric, ceramics, and metal
- Easy to apply and handle
- Suitable for crafts, repairs, packaging, and DIY projects
KSh 20.00Hot Melt Glue Stick (11mm x 190mm)
KSh 20.00 -
9V Battery Connector with DC Plug
Key Features
- Connector Type: 9V snap-on battery clip to DC barrel jack
- DC Plug Size: 5.5mm × 2.1mm
- Cable Length: Approximately 10–15cm
- Easy connection for Arduino boards and modules
- Sturdy design for repeated use
- Lightweight and portable
- Plug-and-play power connection
KSh 50.009V Battery Connector with DC Plug
KSh 50.00











